How to Apply Anti-Slip Tape

How to Apply Anti-Slip Tape Anti Slip Tapes Anti-slip tape is an industrial-strength liner designed to increase the traction on a surface. It comes in a wide variety of shapes, widths, colors and textures, and you can apply it to almost any material. Below are the some simple Steps to apply Anti slip Tapes on any surface 1. Clean The Floor Thoroughly LIIN Use a degreasing solvent on metal floor or degreasing detergent on tile, painted wood or concrete floor. Apply a Stripping Compound 2. Apply a stripping compound to the stairs if they have a strippable finish. Follow the manufacturer's instructions to use the stripper effectively. Scrape off the old finish with a scraper. 3. Paint a Strip of Primer Paint a strip of primer onto concrete or unglazed stone stairs where you intend to apply the tape Lay a Strip of Anti-Slip Tape 4. Lay a strip of anti-slip tape across a step. Position it so it is 1/2 inch from the edge of the stair. Lift one end of the strip and peel back the first 2 inches of the backing 5. Run Roller Over The Tape Roller over the tape with a rubber hand roller. Begin in the center of the strip and roll to one end, then return to the center and roll to the other end Designed & Issued PermaStripe in Public Interest By Source : homeguides.sfgate.com