The Driveway Repair Process
THE DRIVEWAY REPAIR PROCESS STEP02 STEP01 Inspect cracks. If weeds Apply plain white vinegar from your pantry to problem areas. If crack is deep fill it are growing out of them. pull them and clean all cracks with strong spray with garden hose or pressure washer. to about 1/4" of the surface with sand and tamp down STEP03 Apply crack filler - Hot Pour or Cold Liquid Pour Asphalt Fill. Make sure that it won't rain the day you're repairing otherwise you waste your time and money STEP04 Allow time for the Fill to cure. Allow for 24 to 48 hours to cure completely and block off your driveway. Apply the Asphalt sealant such as Coal Tar STEP05 Keep in mind however, for any cracks that are deeper than 2 inches, consider consulting with an Asphalt repair professional. HOPEFULLY FOLLOWING THIS PRIMER SHOULD GET YOUR DRIVEWAY ON THE RIGHT TRACK! Before After Asphalt Kingdom.com PRESENTEDBY Piktochart
The Driveway Repair Process
Source
http://blog....-pictures/Category
HomeGet a Quote