Netgear Ex2700 Setup

Netgear Ex2700 Wireless Range Extender The range extender increases the distance of your wireless network by boosting the existing Wi-Fi signal and augmenting the overall quality so that it reaches over a long distance. The primary function of the extender is to repeat thesignal received from the wireless router of your internet service provider. Hardware Details Of The Extender: On the front of the hardware, you will find the Router link LED, device link LED, and on the side panel, there is power on/off buttons, WPS and Factory reset button. If you want to connect the device through the wire, then there is an Ethernet port given below the hardware. Using The Extender The extender as we know gets the signal from the router and repeats it to boost its strength and speed. Place the router and Netgear Ex2700 in the same room or proximity to the router during the initial setup. Plug the extender to the power supply. 1. Wait for the power LED to turn green and get stable. 2. If the power LED doesn't lit, then check the power on/off button Connecting to the existing home network To extend the coverage of your home network, you need to connect the extender to the router. For this, you can follow any of the below-mentioned ways: • Connect via WPS. • Connect using the Netgear installation assistant. Connect Using WPS Using the WPS method, there is no need to join to the Wifi network using the network name and the password. Press the WPS button simply from the extender and from the router at the same time. Yes, if your router doesn't support this feature, then you will have to follow another method. Once the connection gets established, you will get notified through the link status LED. Now, disconnect the extender from the power supply and place it anywhere of your choice where the signal strength is poor or not proper. Wait for the power LED to turn solid green before start connecting the Wi- Fi devices to it. You can use the router LED to find out the optimal location for placing the extender and the router. From your computer, look for the extender wireless network and connect to it using the default username and password. Connect Using The Installation Assistant • From your computer or mobile, go to the network manager and search for the extender network name. • Open a web browser from the computer. • Enter www Mywifiext net in the search bar and press 'Enter'. • The Extender Setup page will be displayed. • Enter data in the fields carefully and press 'Next'. • Select the network you want to extender from the list of networks. • After selecting the network, you will be prompted to enter the passkey. • Select the SSID and password of your range extender. It is recommended to use the different names and passwords for your range extender. Click 'Finish' and start connecting the wireless devices to the new wi-fi name of your range extender. Visit Us: https://mywifiextfix.com/ Call Us: +1 888 905 2331