Click me
Transcribed

Introducing the Sunfab SAP Bent Axis Piston Pump range

VHS Hydraulic Components Complete Hydraulic Component Supply Introducing the SUNFAB SAP Bent Axis Piston Pump range One of the most common products for truck hydraulics when operating loader cranes, hooklifts and timber cranes amongst many other applications. The new Sunfab SAP a series of light weight casing piston pumps with a fixed displacement for demanding mobile hydraulics. SAP 012-108 RSUNFAB THE SOUROE OF HYDRALIC POWER The SAP 012-108 series covers a displacement range 12-108 cm³/rev. at a maximum pressure of 400 bar. It is a modern, compact pump which meets the market's high demands on flow performance, pressure, efficiency and small installation dimensions. The pump is either mounted directly on the power take-off or on a frame bracket via an intermediate shaft. ADVANTAGES OF USING THIS PUMP LIGHTWEIGHT CORROSION FREE METAL CASING MANUFACTURED WITH HIGH QUALITY HOUSING SPECIALLY DESIGNED TO DISSIPATE HEAT MATERIALS FOR A LONGER LIFE SPAN THROUGH HOUSING FOR COOLER OPERATION SMOOTH OPERATION OVER THE ENTIRE SPEED RANGE, PUMP SPECIFICATIONS Based on the SAP 108 DIN Theoretical oil flow 108 /Min at 1000 RPM Displacement 108 cm³/rev Max Working Pressure 400 bar Weight 13.9 kg PUMP DIMENSIONS Based on SAP 108 DIN A 122mm В 147mm 264mm D 127mm E 133mm 98mm G 106mm H 118mm 1" BSP PUMP INSTALLATION GUIDE The hydraulic system must satisfy the demands on pipe sizes, and filtering in accordance with Sunfab's "General Instructions" 4001. Based on the SAP 108 DIN Check the direction of rotation of the power take off R The rotation direction of the pump Left As delivered Right Change the direction of rotation Turn the cover 180° The solid arrow indicates the direction of rotation. Do not lift the cover! Do not lift the cover! 180° Tightening torques Check that the markings on the teeth are aligned as shown Nm Type of pump Nm otty SAP 012, 017, 025, 034 70 SAP 040, 047, 056, 064 70 SAPT 90 70 SAP 084, 108 100 SAPT 130 100 Fill the housing with hydraulic oil 60 Nm Installing the pump Grease the splined shaft before installation. Use assembly paste for example Molykote G Rapid plus or similar. Do not tap the gear wheel/driver into position. Gear wheel: Use an M12 stud and sleeve. Driver: Use an M12 stud and washer. Lock the gear wheel with a retaining ring or an M12 bolt and locking fluid. Lock the 0-ring and install the pump on the power take off. 80 Nm Refer to Service Information 748 for installation with intermediate shaft. Suction line 24 Nm 150 Nm Connect the suction line, tighten the suction connection bolts in diametric 38 mm (1W) Q- 65 1/min 50 mm (2") Q- 120 I/min pairs. Tighten the hose with two robust hose clamps. 64 mm (2W) Q- 185 1/min 75 mm (3") Q- 265 I/min Connect the pressure line. Sunfab Hydraulics are a leading manufacturer of Piston Pumps and Bent-Axis Piston Motors. They have appointed VHS Hydraulic Components Ltd as an Authorised Distributor in England, Scotland & Wales. The appointment forms a key part of Sunfab UK's strategy of maintaining competitive service levels and flexible delivery times required by smaller customers while expanding to serve OEM customers directly. The range of Sunfab Hydraulic products supplied by VHS Hydraulic Components can be viewed and purchased online at www.hydraulic-components.net Unit 2 Carley Drive Sheffield S20 8NQ United Kingdom VHS Hydraulic Components Complete Hydraulic Component Supply Tel: 01142 764430 Fax: 01142 472526 www.hydraulic-components.net email: [email protected] SUNFAB

Introducing the Sunfab SAP Bent Axis Piston Pump range

shared by ObjectiveCreative on Jul 09
103 views
0 shares
0 comments
One of the most common products for truck hydraulics when operating loader cranes, hooklifts and timber cranes amongst many other applications. The new Sunfab SAP a series of light weight casing pi...

Designer

Objective Creative

Tags

truck pistons

Source

Unknown. Add a source

Category

Technology
Did you work on this visual? Claim credit!

Get a Quote

Embed Code

For hosted site:

Click the code to copy

For wordpress.com:

Click the code to copy
Customize size