Click me
Transcribed

How to Diagnose Air Conditioner Problems

How to Diagnose Air Conditioner Problems When you turn on the air conditioner, what happens? Outside Unit Does Inside Unit is Nothing Not Come On Not Coming On Nothing. !! Thermostat Circuit Breaker Check the thermostat to be sure it is set properly. Check the circuit breaker. If it has tripped, flip it back on. If your air conditioner comes back on, all could be well. A power surge could have caused the breaker to trip. If the breaker trips again you should call for service. Safety Switch Most air conditioning systems have a float safety switch that can shut off the system. If you have been experiencing a plumbing issue it can also affect your air conditioning system. Power Switch There is a power switch connected to many air conditioning systems that looks like a light switch. Check the power switch. If there is one, it should be located near the inside unit. Air conditioners are designed to remove moisture from the air in the form of condensation. This water is routed into the plumbing system and if the plumbing backs up the float safety switch can shut down the air conditioner. Door Switch If someone has been looking at the inside unit and has taken the door off the gas furnace or electric handler, there is a chance that the door is not installed properly. Outside unit does not turn on.. If your air conditioner is blowing warm air you should check to see if the outside unit is coming on. If the outside unit is not coming on you should check these things. Disconnect Box This is also known as an external safety switch. It allows the power to the outside unit (condenser) to be turned off. Be sure that the power is turned on to the unit. This is Usually a box that is located on the wall of the house near the air conditioner. Thermostat Wire Check the small low voltage wire that is connected to the AC condensing unit to be sure it is not cut. Inside unit is not turning on. If the inside unit does not come on and the outside unit does, the problem is likely related to the blower motor. Be it a circuit board, capacitor or motor itself. Most people will need to call for service. If both inside and outside units come on but the air is hot... If you turn on your air conditioner and it is not cooling but both the outside and inside units are running, the following needs to be checked: Air Conditioning Filter Has it been a while since you changed your air conditioning filter? If so, a clogged filter could be the source of your problem. Frozen Coil If you have an extremely clogged and dirty AC filter the system will not be able to move enough cool air to satisfy the thermostat. It will run and run causing the coil to freeze which further restricts air flow. If your filter is dirty, change it. You may not be able to get the system to work right away because there may be ice on the evaporator coil. Turn the fan from AUTO to ON as it will help the evaporator coil to thaw. After the system thaws, turn it back on. If the system refreezes, you have other issues. Sources http://Istclassairservice.com/air-condtioner-problems/ http//homehoustulfuoriscom/home-inprovement/heating-and-coolinghow-to-repair-central-air-conditioners htm http://energygow/energysaver/articles/common-air-conditioner-problems NationalPositions Protitable Internet Marketing

How to Diagnose Air Conditioner Problems

shared by InfographicMarketing on Jun 11
156 views
1 shares
0 comments
Here are a few tips that can save you time and money regarding your air conditioning and heating equipment. Breaker – If your air conditioner is not working, check the breaker. If the breaker has...

Source

Unknown. Add a source

Category

Technology
Did you work on this visual? Claim credit!

Get a Quote

Embed Code

For hosted site:

Click the code to copy

For wordpress.com:

Click the code to copy
Customize size