Click me
Transcribed

Trichloroethylene | Bansal Trading Company

USES OF Trichloroethylene (C2HC13) METAL DEGREASING Metal degreasing or degreasing is a process removal of grease and oil from a surface. It is widely used to remove oils and oil-borne soils from objects that have been stamped, machined, welded, die-cast, etc. DRY-CLEANING Dry cleaning is any cleaning process for clothing and textiles using a solvent other than water. Trichloroethylene has superior degreasing properties. Because of its superior properties it is used by dry cleaners. CLEANING OF GLASS & MEDICAL EQUIPMENT Trichloroethylene is used to clean the glass and medical equipment's. We need the medical equipment's clean so that it doesn't spread any virus so we Trichlor because of good cleaning formula. DRYING ELECTRONIC PARTS It is also used in drying the electronics parts. If the electronic parts are not dried then there are chances of short circuit in the boards. So Trichloroethylene is used in drying the electronic parts REMOVAL OF SOLDER FLUX & CONTAMINANTS Before soldering the electronic components onto boards we use a chemical agent name FLUX because it removes any oxides and impurities. The main reason of removing flux from your board is that it causes low voltage insulation EXTRACTION SOLVENT FOR OILS, FATS, WAXES Trichloroethylene has been widely used and considered as an best degreasing agent for extraction solvent for oils, fats, waxes TO KNOW MORE VISIT OUR WEBSITE HTTPS://BANSALTRADING.COM/ OR CALL US AT 01145086000

Trichloroethylene | Bansal Trading Company

shared by btc-est1956 on Jan 12
0 views
0 shares
0 comments
Trichloroethylene is relatively non-flammable, multipurpose chlorinated solvent with high stability and solvency. It is a clear, colorless liquid with somewhat a sweet odor and a sweet and burning tas...

Category

Other
Did you work on this visual? Claim credit!

Get a Quote

Embed Code

For hosted site:

Click the code to copy

For wordpress.com:

Click the code to copy
Customize size