DIY Snuggie

Snuggie TEACH ME HOW TO -..-- Yo IN ORDER TO CREATE YOUR OWN SNUGGIE You will need: 3YDS OF FLEECE SEWING MACHINE SCISSORS CHALK PINS RULER 1 THE FIRST THING YOULL WANT TO DO IS EVEN UP THE CUT EDGE OF THE FLEECE* * F YOURE USING BLANKETS, YOU CAN SKIP THIS STEP. 2 MEASURE UP 24 FROM THE BOTTOM AND MARK A LINE 3YDS ACROSS THE FABRIC. CUT ALONG THE LINE. THIS NEW 24 PIECE WILL BE FOR THE SLEEVES. 3 FOLD THIS NEW PIECE IN HALF AND CUT DOWN THE CENTER. SET THESE PIECES ASIDE FOR LATER. 4 NOW TAKE THE OTHER LARGE PIECE OF FABRIC AND FOLD IT IN HALF LENGTHWISE. 12-14 MEASURE DOWN FROM THE TOP 12"-14'M AND IN FROM +10→ 6x9 THE FOLD 10'-11", WITH YOUR CHALK DRAWA 6X9 OVAL FOR THE ARM HOLES. NOW PIN THE FABRIC TOGETHER AND CUT THE OVAL OUT FROM BOTH LAYERS OF FABRIC. TAKE THE SMALLER PIECES YOU CUT EARLIER AND FOLD THEM IN HALF PINNING THE TWO SHORTER SIDES TOGETHER. SEW OR SURGE ALONG THIS SEAM WITH A 1/2" SEAM ALLOWANCE. 7 NEXT, PIN THE EDGE OF EACH SLEEVE TO THE CIRCLES YOU CUT OUT FOR THE ARMHOLE. MAKE SURE YOU ARE PINNING THE RIGHT SIDES OF THE FABRIC TOGETHER. IT'S BEST TO PIN THEM BOTH AT THE SAME TIME SO THEY BOTH TURN OUT THE RIGHT WAY. SEW OR SURGE ALONG THE EDGE WITH A 1/2" SEAM ALLOWANCE. 8 FINALLY TURN RIGHT-SIDE-OUT AND YOURE DONE! Your Fleece SOURCE: HTTP://WWW.INSTRUCTABLESCOM/D/MAKE-YOUR-OWN-SNUGGIE/ of