Simple Guide to Change a Flat Tyre

SIMPLE GUIDE TO CHANGE A FLAT TYRE A flat tyre can happen to any person at any time. This is an unexpected situation, which you need to solve by applying the basic mechanics of changing a tyre. To get the job done right and quickly, you must make use of the key tips. You will get to know how to handle these types of situations by applying the correct steps. Here are the key tips to change flat tyres. FIND A SAFE PLACE TO PULL OVER You must find a place where the ground is level to prevent your car from rolling. If you are on the roadside, make sure you pull over as far as possible. Also, you must avoid stopping near any road bends as this lowers the visibility for both you and other chauffeurs. Driving experts always recommend you to drive to a better spot if you are in an unsafe and dark area. USE PARKING BRAKE AND HAZARD LIGHTS If you enrol in a driving school, you will get to know that you must make use of parking brakes and hazard lights for safety purposes. This is useful as it helps to increase your visibility and avoid rolling of your car. LOOSEN THE LUG NUTS If your car consists of a wheel cover, you must pry it off. After that, make sure you secure the wrench onto a lug nut and move it in the counterclockwise direction to loosen it. You need to repeat this method with each of the lug nuts to remove all of them including the tyre. REPLACE THE TYRE AND LUG NUTS Place the spare tyre with the lug nuts on the wheelbase and push it as far as possible. Make sure you are able to tighten the nuts in a way that the tyre stays in its place firmly. Otherwise it may cause vibrations while driving. Hope by now you have understood how to easily change the flat tyre of your car. If you find the guide to be useful, don't forget to share it with your friends! 14 Klass Rd, Cranbourne VIC 3977 ADVENTURE Call: 0414 201 503 DRIVE SCHOOL Mon - Sun 07:00 AM - 07:00 PM adventuredriveschool.com.au