Overhead Garage Door Maintenance Tips!

Overhead Garage Door Maintenance TITAN Garag e Doors Tips! An automatic garage door has two main components: the door and the opener. This blog will show you how to maintain your garage door so that it lasts longer. Let's begin with the door. How to maintain a garage door? The ability for a garage door to open or close smoothly is controlled by the garage door springs. The tracks on the wall guide the garage door up and down, while the garage door springs keep them in place. A garage door technician can easily fix a garage door problem. If you think you need an overhead garage door repair, follow these steps. 1 (2 3 The third step is to clean the tracks thoroughly with The first step is to inspect The second step is to check the tracks with a level to ensure they the metal tracks in the garage. Pay attention to the mounting brackets that hold are correctly aligned. The horizontal tracks of roll-up garage doors should slope slightly a concentrated household cleaner to remove dirt and hardened grease. After cleaning the tracks, wipe the tracks to the walls. Make sure the brackets are tight by downward; the vertical sections of tightening any loose bolts or screws. If you're working in the garage with the garage the track should align with each the rollers as well. other. The vertical and horizontal tracks on garage walls should have equal heights. Loosen the screws or bolts holding the mounting door closed, look for dents, crimps, or flat spots on the tracks. Use a rubber mallet brackets, but do not remove them, to pound out any damaged and tap the tracks into place areas, or use a hammer and carefully if they are not correctly woodblock. Damaged tracks should be replaced in order for a garage door to operate properly. aligned. Ensure the tracks are level with the level and tighten the screws or bolts at the mounting brackets. 4 IS YOUR GARAGE DOOR SQUEAKY? The fourth step is to check for loose hardware and tighten it as necessary. If there are loose screws on swing-up doors, tighten them. Check the plates where the TIME TO LEVEL spring is mounted to ensure that the screws are tight. Ensure that the hinges that hold the doors together are tight; replace any damaged hinges and tighten any loose screws. The hinges can often be serviced to fix a door UP that is sagging on one side. Replace a screw hole that has enlarged with one that is long and of the same diameter, and use a hollow fiber plug, dipped in carpenters' glue, along with the new screw. Wood cracks at the hinges can be filled with wood filler by removing the hinges and filling the cracks and screw holes. Replace the hinges after the filler has dried. Use solid wood for the hinges if possible. Repairing a roll-up door with only one torsion spring in the middle is not recommended. Spring tension can be hazardous, and you should consult a professional if the spring is broken. Word of Caution It is advisable to never take the task of an overhead garage door repair into your hands but always to hire a professional garage door company. Still, if you want to pursue the job yourself, make sure to stay safe and attentive. This is why DIY repair projects need to be avoided at any cost. Still, as said earlier, you can always rely on a professional company to accomplish the task of garage door repair right. TITAN No matter how many YouTube videos you may watch or how many DIY blogs you read (yes, like this one), you should never forget that you should rely upon a professional for garage door repair. If you live in Colorado, you can entrust Titan Garage Doors for garage door repair in Colorado. Source | titangaragedoorsco.wordpress.com/2021/12/13/overhead-garage-door-maintenance-tips/