5 Ways to Turbocharge Your Wireless Business Online

How to Create An Art Gallery in Your Home How to Hang Pictures with Traditional Hardware Placement of Wall Art For single pictures, center the artwork on the wall or over a large piece of furniture. Start with the center of the picture at eye level and then adjust to your own taste. For multiple pictures on the same wall, experiment with different placements of the art ensemble. Trace each picture frame on a sheet of brown butcher paper or newspaper. NEWS Cut out actual size models of the artwork and tape them to the wall using painter's tape to avoid damaging the wall paint. Try several different variations until you find the perfect arrangement. C AA IA Installation in 7 Easy Steps Use a stud finder and 1 mark the locations using painter's tape. Hold the picture up to the wall and use a level to check your placement. 2 3 Place a strip of painter's tape on the wall just above the top of the picture and mark the left and right corners on the tape. Measure from left to right and mark the center point on the tape for reference. 4. Lay the picture face down and pull the hanging wire taut. Measure from the top of the frame to the wire where the hook will go. Find the hook location on the wall by measuring down from the Drill a small hole to prevent cracking, then install the hook screw and hang the picture. painter's tape. Use a level to check the top edge placement and make adjustments. Tension Hanging System For a more professional gallery-style installation, try a tension hanging system using a wire suspended between two tensioners on the wall, floor or ceiling. It is an eye-catching way to display multiple pieces of same-size artwork, such as photos, window displays, banners, etc. Essentially used for high traffic areas and thus it allows you the versatility to change the pieces whenever you like. After attaching one tensioner in the floor and one in the ceiling, a taut wire is added to connect the two points and provide a stable Photos may be displayed between two tension wires and positioned anywhere along the vertical plane. Additional Applications for Tension Hanging Systems Retail store signs are a natural fit for tension hanging systems, since they can be placed anywhere in the store and are not dependent on a wall for support. Point-to-point tension hanging systems have a directional pivot head on the tensioners to allow them to hold artwork at an angle so that they can be installed: Ceiling to floor Ceiling to wall Wall to wall Tension hanging systems can be used to display a wide variety of items in addition to artwork. In one creative design, a wine rack was created out of a matrix of tension hanging wires. /hanging pietures right the tete/ http //www.ayvtematicart.com/ndeo-library atp//www.aystematicart.com/tenaien-rystemam http//www.houLOom/photon/57721todera-Wne-Cellar-modera-wine-oelar-toreat SYSTEMATIC ART Picture Monging systems Netherlands-044-cladioli and Asters ENationalPositions g/o/y/2a by The Mreegie Clant attp//kr/e/rwaad attpe//etiveoemmons.org/enan/by/2.0/ ton://fickr/e/es httpn//ereativeoemmens.org/icensen/by/2.0/