Car Detailing

CAR DETAILING Necessary Steps Step 1 Step 2 Step 3 WASH DRY CLAY BAR To protect the paint, better make use of two bucket method. If required, remove old wax using dish soap. Use blower to dry your car. In case, if you don't have a blower, make use of thick and big microfiber towels. Use new, good and clean clay bar to clay the car. Carefully clay the windows, tail lamps and headlamps.. Step 4 Step 5 Step 6 POLISH GLAZE SEALANT Polish is required in case of paint correction. Pick your compound and buffing pads as per your polish needs. Glazes increase the depth and gloss in the paint. But, only one coat is necessary for maximum results. Remember, spread it as thin and give each coat of sealant at least 1 hour to cure and bond to the paint. Step 7 Step 8 Step 9 WAX MICROFIBER WHEEL & TIRE Apply wax as thin as possible and in general you should give each coat of wax 1 to 24 hours cure time. Remember to remove tags on microfiber products to minimize the risk of ruining the paint. Wash it before using. Apply your tire dressing in thin, evenly coats. Drive the car a few feet after applying the first coat of dressing. Step 10 EXTERIOR TRIM Step 11 Step 12 GLASS INTERIOR For best results, degrease your trim prior to applying a dressing. Make sure your dressing offers UV protection. Use little glass cleaner to minimize streaking. Never use ammonia based glass cleaners on tinted windows. Protect your leather with a product that blocks UV rays. Never use oily or greasy products that adds a shine. Step 13 ENGINE BAY You need degreaser, protectant and cloths. Remember, don't use WD-40 or Windex to clean the engine bay. Infographic Design by Vive-Houston.com